-Products
Note for new visitors to this site. Everything we stock is for 1/24th scale (or 1/25th scale where marked) plastic or resin construction kits ONLY. Sorry, but we do not cater for ANY diecast scales or 1/32nd plastic, or the larger Mongram 1/16th or any of the RC scales. Kit Form Services, 7 Horbling Lane, Stickney, Boston, Lincs, PE22-8DG, England. 01205 480766 Please note our new e mail address kfs1@btinternet.com |
||||
Legal Notice The copying or reproduction of ANY parts or products shown or listed in this website catalogue is strictly forbidden. Such actions are considered an offence under international copyright law. Any such action establishes grounds for a civil action and may give rise to criminal prosecution. |
||||
|
EXHAUST
STACK KITS-
|
||||
 |
PE1 | Peterbilt Stacks |
Pair of self assembly exhaust stacks with TQ resin silencers, aluminium inlet/outlet pipes & chromed photoetch heat shields with etched corporate logo or wording. Instructions included. |
£7.50GBP
|
|
-
|
PE2 | Kenworth Stacks | As Above |
£7.50GBP |
|
|
PE3 | Mack Stacks | As Above |
£7.50GBP To be discontinued on sell out
|
|
|
PE5 | Ford Stacks | As Above |
£7.50GBP To be discontinued on sell out
|
| PE7 | Plain Stacks | As Above |
£7.50GBP
|
|
|
-
|
PE8 | Volvo Stacks | As Above |
£7.50GBP
|
PE11 |
Scania Stacks | As Above |
£7.50GBP
|
|
|
|
PE12 |
Eminox Stacks | As Above |
£7.50GBP
|
|
|
||||
WHEEL
TRIMS |
||||
The following wheel trim sets are to be discontinued on selling out. Whilst we have good stock of Scania, Volvo & Mercedes, the remainder are low in number & available only while stocks last. |
||||
|
|
PE12A |
Scania |
Set of 4 chromed etch wheel trims, 2 front with tread rings & 2 full rear covers |
£3.50GBP |
|
|
PE13A |
Volvo | As Above | £3.50GBP |
|
PE14A |
Mercedes | As Above | £3.50GBP |
|
|
PE17A |
Plain | As Above | £3.50GBP |
|
|
|
PE18A |
MAN | As Above | £3.50GBP |
|
|
PE19A |
ERF |
As Above
|
£3.50GBP
|
TRUCKSHOW
CUSTOM KITS |
||||
|
|
PE36 | Scania 4 & R500 Series |
Full set of chromed custom goodies to dress up your model. Includes wheel trims, badging, chequer plate panels, Spatz, & loads more |
£8.25GBP |
|
|
PE37 | Volvo FH2 |
As Above | £8.25GBP |
|
|
PE38 | Mercedes Actros | As Above | £8.25GBP |
|
|
PE40 | DAF XF-105 |
Redesigned replacement for discontinued PE40 XF95 Custom Set | £8.25GBP |
|
|
PE41 | MAN T-GA | As Above | £8.25GBP |
|
PE42
|
Peterbilt |
A US
Mini Custom Set, badges, flap weights, logos, marker lights, number
plate holders & custom parts
|
£5.00
GBP
|
|
PE43
|
Kenworth |
As Above
|
£5.00
GBP
|
|
PE44
|
Western
Star |
As Above
|
£5.00
GBP
|
|
PE45
|
MACK |
As Above
|
£5.00
GBP
|
|
PE46
|
Ford |
As Above
|
£5.00 GBP To be discontinued on sell out |
BADGING |
||||
The following Renault badge sets will be discontinued on sell out. The PE53 Mack set remains unaffected. |
||||
|
|
PE50 | Magnum 520Ti | Minor badging set for the Renault Magnum | £0.75GBP |
|
|
PE51 | Magnum420Ti | As Above | £0.75GBP |
|
|
PE52 | Magnum385Ti | As Above | £0.75GBP |
|
|
PE53 | MACK |
25 badges in stainless steel, covers B61 to Superliner. |
£2.50GBP |
CAB,
CHASSIS & GENERAL |
||||
|
|
PE54 |
Chain Stretcher Kit (Heavy) |
Set of 4 working heavyweight chain stretchers, self assembly, complete with chain split rings & lashing points. For low-loader & heavy haulage models. |
£5.50GBP |
|
|
PE55 | Chain Stretcher Kit (Light) |
As above but in lighter weight for general haulage |
£5.50GBP |
|
|
PE56 | Chequer Plate | 103mm x 138mm 1 bar pattern, chromed. | £4.50GBP |
|
|
PE57 | Chequer Plate | As Above but in plain brass | £4.00GBP |
|
|
PE58 | Chequer Plate | 103mm x 138mm 2 bar pattern, chromed | £4.50GBP |
|
|
PE59 | Chequer Plate | As above but in plain brass | £4.00GBP |
|
|
PE60 | Chequer Plate |
103mm x 138mm 5 bar pattern, chromed |
£4.50GBP |
|
|
PE61 | Chequer Plate | As above but in plain brass | £4.00GBP |
|
|
PE62 | Fuel
tank Steps |
4 Set of steps does 2 x 60mm long tanks & includes matching catwalk, chromed. | £4.50GBP |
|
|
PE63 | Ratchet Straps | Set of 10 ratchet straps with webbing strapping. | £5.50GBP |
|
|
PE64 | Cab Junk | 57 chromed cab detail items including speaker grills, sunglasses, padlocks etc. | £3.50GBP |
|
|
PE66 | Torque Tights | 60 brass loose wheel nut indicators | £2.00GBP To be discontinued on sell out |
|
|
PE67 | Deck Plates | Car transporter deck plates & lashing hooks. Set of 5 plates 120mm long x 21mm wide (folded) & 24 hooks | £6.50GBP |
|
|
PE81 | Rope Hooks & Cleats | Set of 60 single hooks & 30 double cleats in etched brass | £2.50GBP |
|
|
PE82 | Slam Locks | Set of 20 oblong & 22 round finely detailed slam locks in chromed brass. Suit use on wreckers & tool lockers etc. | £3.50GBP |
|
|
PE83 | Screen Wipers | Stainless steel, very fine & super detail, covers most makes in left & right hand drive (see pic) | £3.50GBP |
|
|
PE84 | MOT Plates | For use on tractor & trailer, data plates & tax disc decals included plus tax holders & trailer rear triangles. | £3.50GBP |
|
|
PE85 | Naked Ladies & Custom Bits | Naked ladies, V8 badges, Custom Scripts, number plate surrounds. Great value for money | £5.00GBP |
| |
PE86 | Snow Chains & Hanger Kit | Pair of handed snow chain hangers with fine chain, enough for 4 tyres + instructions on making snow chains | £7.00GBP |
|
|
PE87 | Curtainsider Buckle Kit | Set of 50 stunning etched curtainsider buckles with straps & hooks all in one piece. Straps have `etched in` webbing pattern ! (Solartex curtains are also available in various colours. See special supplies section) | £6.50GBP |
|
PE89 | Nut & Bolt Heads | 450 etched brass nut & bolt heads in various sizes & styles. Perfect for the chassis scratch builder. 0.018" brass | £4.50GBP |
|
PE90 | Trailer Latches | A set of 32 typical trailer door & locker slamlocks & fasteners in 4 designs...8 of each. Stainless steel. | £4.50GBP |
|
PE91 | Mesh Screens | A set of 4 very thin & very fine mesh screens @ 68mm square each. Ideal for radiator & oil cooler mesh, guards & turbo shields etc. | £8.50GBP |
|
PE92 | Jost MP0117 Mounting Plate | A heavy duty etched brass fifth wheel bed mounting plate. Especially designed for use with the TQ-75 JSK38/G1 heavy haulage fifth wheel turntable | £3.50GBP To be discontinued on sell out |
|
PE93
|
Jost MP0925 Mounting Plate |
A heavy duty etched brass fifth wheel bed mounting plate. Especially designed for use with the TQ-76 JSK50 heavy haulage fifth wheel turntable (Shown fitted)
|
£3.50GBP To be discontinued on sell out |
[Whats new?] [About us] [Working with resin & photoetch] [Ordering] [gallery] [Contact us] [Home] [Auslowe parts]
[Photoetch parts] [Standard resin parts] [Metal Parts ] [KFS TQ range] [Special supplies]
[Scratch building supplies] [Decals]
© Kit Form Services