-Products

-

-

-

-

-

-

-

-

 

 
 
|
|
|
|
|
|
 

Note for new visitors to this site. Everything we stock is for 1/24th scale (or 1/25th scale where marked) plastic or resin construction kits ONLY.

Sorry, but we do not cater for ANY diecast scales or 1/32nd plastic, or the larger Mongram 1/16th or any of the RC scales.

Kit Form Services, 7 Horbling Lane, Stickney, Boston, Lincs,

PE22-8DG, England.

01205 480766

E mail address kfs1@btinternet.com

 

TQ Cast Metal Parts
 TQMT-1
 Volvo Cab Mount
Volvo FH/FM 12-16 rear cab mounting bracket. Fits all Italeri/Revell FH 1st series. Rectangular headlight version

 2.00GBP

To be discontinued on sell out

TQMT-2 
 Trailer Door Hinges
Complete set of trailer rear door furniture. 4 lock levers & 8 hinges
 2.00GBP
 TQMT-3
 Air Valve Set
23 Piece air valve set. Find chassis wiring & piping in Special Supplies section

 6.50GBP

 TQMT-4

 Steer Axle Kit

1/24th Scale

A universal cast metal steering axle kit. Ideal for heavy resin cabs & the scratch builder

 5.50GBP

TQMT-4a

Steer Axle Kit

1/25th Scale

A universal cast metal steering axle kit. Ideal for heavy resin cabs & the scratch builder.

As per above photograph but with shorter 1/25th scale axle beam

£5.50GBP

 TQMT-5

8 Wheeler Steer Axle Kit. (Cranked)

83mm axle centres  

A double steering axle kit with cranked axles. Ideal for use on traditional 8 wheelers. A 41 part all metal kit complete with springs & inter axle steering linage.

£11.00GBP

Example of above built onto a TQ88 chassis kit
TQMT-5a

8 Wheeler Steer Axle Kit. (Straight)

83mm axle centres

A double steering axle kit with straight axles. Similar to above. Ideal for use on modern 8 wheel tippers, hook loaders etc. A 41 part all metal kit complete with springs & inter axle steering linage.

£11.00GBP

TQMT-6
Bump Stop Set
Set of 4 trailer rear end bump stops plus a number plate holder with light
£1.50GBP
TQMT-10 Tool & Shackle Kit A 32 part set of tools & shackles etc for use with wreckers & heavy haulage

£11.00GBP

TQMT-11
Right Angle Marker Lights
Set of 10 cast metal right angle rubber arm marker lights
£1.50GBP
 
M.C.A. TURNED ALUMINIUM PARTS

READ THIS;- The MCA Polished Aluminium Range is now ONLY available on a direct supply basis from MCA. The remainder of this page simply serves as an advert for MCA. To purchase these parts please e mail MCA directly on michael.cherry2@ntlworld.com

 AL-3
 Fuel Tank 1/24

29mm diam x 43mm long, recessed end

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.

 AL-4
 Fuel Tank 1/24

29mm diam x 60mm long, recessed end

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.

 AL-5
 Fuel Tank 1/24

29mm diam x 43mm long, flush end

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
 AL-6
 Fuel Tank 1/24

29mm diam x 60mm long, flush end

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
 AL-9
 Exhaust Pipes

Big bore, pre-drilled bent & polished, fits KFS stack sets. Pair

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-16
 Spyder Wheels 1/24 Standard Steer

Pair of standard width steer rims with 6 spoke resin spyders & brake drums. Italeri standard rubber tyres included

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-17
 Spyder Wheels 1/24 wide steer

Pair of wide steer rims with 6 spoke resin spyders & brake drums. Italeri super single rubber tyres included

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
Please note, these parts are ONLY available from MCA direct, NOT via KFS. e mail michael.cherry2@ntlworld.com
AL-18
Spyder Wheels 1/24 Drive 

Drive axle set of rear rims with 6 spoke resin spyders & brake drums. 4 Italeri standard rubber tyres included

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-19
US Type Alcoa Real Aluminium Wheels

A complete 10 wheeler set of real spun aluminium wheels. Complete with rubber tyres & 60 seperate REAL nuts & bolts plus two socket spanners for assembly. The hub centre, axle mounting & moon discs are all turned as one with the wheel.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-19a
US Type Alcoa Real Aluminium Wheels

Exactly as above but with super single steer wheels & standard width drive wheels

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-Socket
Socket Spanner

A handy scocket spanner for easier fitting of AL part number wheel nuts. (as supplied with AL19 US 10 wheeler set)

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.

AL-20

European Type Alcoa Super Single Trailer Wheels.

Pair of deep dish real aluminium super single trailer wheels. Fits all KFS TQ H1 to H9 hubs. Also fits KFS trailer disc brake kit. Can also be used as an alternative wide steer wheel to AL-21. Comes complete with real threaded screws & nuts plus Italeri wide rubber tyres.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-21
European Type Alcoa Super single steer axle wheels.

Pair of shallow dish real aluminium super single steer axle wheels. Fits all KFS TQ H1 to H9 hubs & comes complete with pair of H-5 steer hubs. Also comes complete with real threaded screws & nuts plus Italeri wide rubber tyres.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
Please note, these parts are ONLY available from MCA direct, NOT via KFS. e mail michael.cherry2@ntlworld.com
AL-22 European Type Alcoa Standard Width Steer Axle Wheels.

Pair of standard width real aluminium steer axle wheels. Fits all KFS TQ H1 to H9 hubs & comes complete with pair of H-5 steer hubs. Also comes complete with real threaded screws & nuts plus Italeri standard truck rubber tyres.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.

AL-23

European Type Alcoa Standard Width Drive Axle Wheels.

Set of 4 standard width real aluminium drive axle wheels. 2 inner & 2 outer. Fits all KFS TQ H1 to H9 hubs. Comes complete with real threaded screws & nuts plus 4 Italeri standard truck rubber tyres.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-24

Custom Side Pipes

Pair of polished real aluminium side pipes. Sized to fit Scania 4 & R Series, Merc Actros, Magnum, DAF XF, Volvo FH, MAN TG-A, etc. overall length 88mm

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-25B Aluminium Air Horns (Pair)

Pair of polished aluminium air horn. Trumpet ends, 27mm long

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.

AL-25C

Aluminium Air Horns (Pair)

Pair of polished aluminium air horn. Trumpet ends 32mm long. See photo in 25B above

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-26

Multi hole super singles

Pair of real aluminium Continental multi-hole super single wheels with nuts & screws & resin steer hubs

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
Please note, these parts are ONLY available from MCA direct, NOT via KFS. e mail michael.cherry2@ntlworld.com
AL-27 Wheel Trims (Pair)

Pair of polished real aluminium wheel trims with open centres. Fits all AL wheels & TQ resin wheels

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-28 Wheel Trims (Pair)

Pair of polished real aluminium wheel trims with closed centres. Fits all AL wheels & TQ resin wheels

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-45 Wheel Trims Rear Pair

A pair of 'knock in' type rear wheel rim trims to fit standard Italeri rear wheels & TQ22 drive wheels

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-29 Roof Spot Light Bar

6 Spotlight roof bar for Scania 4 & R Series Topline/Highline

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-46 Roof Spot Light Bar

4 Spotlight roof bar for Scania 4 & R Series with flat roof, (i.e TQ-90 flat roof.) As per AL-29 but flatter profile.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-31 Nudge Bar

Scania 4 & R Series under-bumper nudge bar, plain

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-32 Nudge Bar

Scania 4 & R Series under-bumper nudge bar, with turned down centre

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-33 Roof Spot Light Bar

Generic roof spot light bar with 6 spots & 2 air horns

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-34 Front Grill Spot Bar

Enclosed type spot light bar for front grill, universal fit, 4 spots

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
Please note, these parts are ONLY available from MCA direct, NOT via KFS. e mail michael.cherry2@ntlworld.com
AL-35 Front Grill Spot Bar

Open bar type spot light bar for front grill, universal fit, 4 spots

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-36 Nudge Bar

Scania 4 & R Series under-bumper nudge bar, with second, smaller, upper rail.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-37 Roof Spot Light Bar

6 Spot roof spot light bar, shaped & fitted for Volvo FH Globetrotter. See AL-29 for design shape

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-38 Front Grill Spot Bar

An enclosed grill spot bar with 4 spots

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-39 Moosebar.

A width adjustable real aluminium moosebar. Comes with chromed photo-etch bottom hinges & fine etched mesh infill panels.

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-47 Exhaust Stack Kit

A width adjustable, 9 part, vertical exhaust stack set, ideal for day cabbed US marques. Includes cross over pipes & bottom elbows, adjustable outlet pipes & grab handles

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
View of AL47 kit parts assembled
AL-48
Exhaust Stack Kit

Pair of hand made real aluminium Eminox big bore style exhaust stacks. Easy self assembly. Fully adjustable for width, angle & position. Shield size 13mm diameter x 55mm long. Outlet pipe 55mm long

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
AL-49
Exhaust Stack Kit

As above but with a longer heat shield @ 70mm & longer outlet pipe @ 80mm More suited to vehicles with a higher roof i.e Scania Topline

michael.cherry2@ntlworld.com

We do NOT stock this item, please contact MCA to order.
Please note, these parts are ONLY available from MCA direct, NOT via KFS. e mail michael.cherry2@ntlworld.com

Legal Notice
The copying or reproduction of ANY parts or products shown or listed in this website catalogue is strictly forbidden. Such actions are considered an offence under international copyright law. Any such action establishes grounds for a civil action and may give rise to criminal prosecution.